Investigation of Cross-Coupling in Piezoelectric Transducer Arrays and Correction

Authors

  • Abdelmajid Bybi Mohammed V University in Rabat, High School of Technology in Sale, MEAT, Sale, Morocco
  • Sébastien Grondel Polytechnic University (UPHF), IEMN, UMR CNRS 8520, OAE Department, Valenciennes, France
  • Ahmed Mzerd Mohammed V University in Rabat, Faculty of Science, STCE, Energy Research Center, Rabat, Morocco
  • Christian Granger ISEN Department, IEMN, UMR CNRS 8520, Lille, France
  • Mohammed Garoum Mohammed V University in Rabat, High School of Technology in Sale, MEAT, Sale, Morocco
  • Jamal Assaad Polytechnic University (UPHF), IEMN, UMR CNRS 8520, OAE Department, Valenciennes, France

Keywords:

cross-coupling, piezoelectric transducer arrays, correction method

Abstract

Cross-coupling in piezoelectric transducer arrays is an undesirable phenomenon which decreases the performance of these devices. Indeed, when one element of a transducer is driven, it generates parasitic displacement fields at the radiating surfaces of the neighboring elements, which changes the directivity of the array. The objective of this paper is to investigate the cross-coupling effects on the piezoelectric transducer arrays performance and to propose solutions to reduce this parasitic phenomenon. In this context, it is demonstrated that a filling material having high mechanical losses contributes to the reduction of cross-coupling. In addition to this, a procedure of active cancellation of cross-coupling is successfully tested in the case of two transducer arrays vibrating in the transverse mode for the first prototype and thickness mode for the second one. Finally, the ability of the method is demonstrated even when the displacement at the radiating surface of the transducer array is not uniform.

References

J. Y. Zhang, W. J. Xu, J. Carlier, X. M. Ji, S. Queste, B. Nongaillard, and Y. P. Huang, “Numerical and experimental investigation of kerf depth effect on high-frequency phased array transducer,” Ultrasonics, vol. 52, no. 2, pp. 223-229, February 2012.

Q. Yue, D. Liu, J. Deng, X. Zhao, D. Lin, W. Di, X. Li, W. Wang, X. Wang, and H. Luo, “Design and fabrication of relaxor-ferroelectric single crystal PIN-PMN-PT/epoxy 2-2 composite based array transducer,” Sensors and Actuators A: Physical, vol. 234, pp. 34-42, October 2015.

A. Bezanson, R. Adamson, and J. A. Brown, “Fabrication and performance of a miniaturized 64-element high-frequency endoscopic phased array,” IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, vol. 61, no. 1, pp. 33-43, January 2014.

Z. Zhang, J. Xu, L. Yang, S. Liu, J. Xiao, X. Li, X. Wang, and H. Luo, “Design and comparison of PMN-PT single crystals and PZT ceramics based medical phased array ultrasonic transducer,” Sensors and Actuators A: Physical, vol. 283, pp. 273-281, November 2018.

C. Liu, F. T. Djuth, Q. Zhou, and K. K. Shung, “Micromachining techniques in developing high-frequency piezoelectric composite ultrasonic array transducers,” IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, vol. 60, no. 12, pp. 2615-2625, July 2013.

J. M. Cannata, J. A. Williams, Q. Zhou, T. A. Ritter, and K. K. Shung, “Development of a 35-MHz piezo-composite ultrasound array for medical imaging,” IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, vol. 53, no. 1, pp. 224-236, January 2006.

H. R. Chabok, J. M. Cannata, H. H. Kim, J. Williams, J. Park, and K. K. Shung, “A high-frequency annular-array transducer using an interdigital bonded 1-3 composite,” IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, vol. 58, no. 1, pp. 206-214, January 2011

Q. Zhian, P. A. Lewin, and P. E. Bloomfield, “Variable-frequency multilayer PVDF transducers for ultrasound imaging,” Proc. SPIE, April 1997, vol. 3037, pp. 2-12.

B. T. Khuri-Yakub and O. Oralkan, “Capacitive micromachined ultrasonic transducers for medical imaging and therapy,” Journal of Micromechanics and Microengineering, vol. 21, no. 5, pp. 54004-54014, May 2011.

J. Assaad and C. Bruneel, “Radiation from finite phased and focused linear array including interaction,” The Journal of the Acoustical Society of America, vol. 101, no. 4, pp. 1859-1867, 1997.

Y. Roh and M. S. Afzal, “Optimal design of a sparse planar array transducer for underwater vehicles by inclusion of crosstalk effect,” Japanese Journal of Applied Physics, vol. 57, no. 7S1, pp. 07LG02-1-07LG02-7, June 2018.

M. Celmer and K. J. Opielinski, “Research and modeling of mechanical crosstalk in linear arrays of ultrasonic transducers,” Archives of Acoustics, vol. 41, no. 3, pp. 599-612, 2016.

M. Celmer, K. J. Opielinski, and M. Dopierała, “Structural model of standard ultrasonic transducer array developed for FEM analysis of mechanical crosstalk,” Ultrasonics, vol. 83, pp. 114-119, February 2018.

S. Ballandras, P. F. Edoa, F. Langrognet, W. Steichen, and G. Pierre, “Prediction and measurement of cross-talk effects in a periodic linear array built using ultrasound micromachining,” Proc. IEEE Ultrasonics Symposium, October 2000, pp. 1139-1142.

K. J. Opielinski, M. Celmer, and R. Bolejko, “Crosstalk effect in medical ultrasound tomography imaging,” Joint Conference-Acoustics, September 2018, pp. 1-6.

A. Bybi, S. Grondel, J. Assaad, A. C. Hladky-Hennion, C. Granger, and M. Rguiti, “Reducing crosstalk in array structures by controlling the excitation voltage of individual elements: a feasibility study,” Ultrasonics, vol. 53, no. 6, pp. 1135-1140, August 2013.

S. Pyo and Y. Roh, “Analysis of the crosstalk in an underwater planar array transducer by the equivalent circuit method,” Japanese Journal of Applied Physics, vol. 56, no. 7S1, pp. 07JG01-1-07JG01-6, June 2017.

F. P. Branca, F. Bini, F. Marinozzi, and A. Grandoni, “Optimum choice of acoustic properties of filling materials using optical measurement,” IEEE Ultrasonics Symposium (IUS), August 2004, vol. 3, pp. 1663-1665.

W. Lee and Y. Roh, “Optimal design of a piezoelectric 2D array transducer to minimize the cross-talk between active elements,” IEEE Ultrasonics Symposium (IUS), September 2009, pp. 2738-2741.

H. J. Fang, Y. Chen, C. M. Wong, W. B. Qiu, H. L. Chan, J. Y. Dai, Q. Li, and Q. F. Yan, “Anodic aluminum oxide-epoxy composite acoustic matching layers for ultrasonic transducer application,” Ultrasonics, vol. 70, pp. 29-33, August 2016.

M. H. Amini, T. W. Coyle, and T. Sinclair, “Porous ceramics as backing element for high-temperature transducers,” IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, vol. 62, no. 2, pp. 360-372, February 2015.

S. M. Ji, J. H. Sung, C. Y. Park, and J. S. Jeong, “Phase-canceled backing structure for lightweight ultrasonic transducer,” Sensors and Actuators A: Physical, vol. 260, pp. 161-168, 2017.

J. Henneberg, A. Gerlach, H. Storck, H. Cebulla, and S. Marburg, “Reducing mechanical cross-coupling in phased array transducers using stop band material as backing,” Journal of Sound and Vibration, vol. 424, pp. 352-364, 2018.

B. Cugnet, A. C. Hladky, and J. Assaad, “Numerical cross-coupling in acoustical arrays,” Ultrasonics, vol. 40, no. 1-8, pp. 503-506, May 2002.

A. Bybi, C. Granger, S. Grondel, A. C. Hladky-Hennion, and J. Assaad, “Electrical method for crosstalk cancellation in transducer arrays,” NDT&E International, vol. 62, pp. 115-121, March 2014.

S. Zhou, G. L. Wojcik, and J. A. Hossack, “An approach for reducing adjacent element crosstalk in ultrasound arrays,” IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, vol. 50, no. 12, pp. 1752-1761, December 2003.

P. L. Van Neer, G. Matte, J. Sijl, J. M. Borsboom, and N. de Jong, “Transfer functions of US transducers for harmonic imaging and bubble responses,” Ultrasonics, vol. 46, no. 4, pp. 336-340, November 2007.

K. C. T. Nguyen, L. H. Le, M. D. Sacchi, L. Q. Huynh, and E. Lou, “Adaptive noise cancellation in the intercept times-slowness domain for eliminating ultrasonic crosstalk in a transducer array,” Proc. IFMBE, 5th International Conference on Biomedical Engineering in Vietnam, Springer, August 2015, vol. 46, pp. 32-35.

C. Ishihara, T. Ikedaa, and H. Masuzawaa, “Higher-frame-rate ultrasound imaging with reduced cross-talk by combining a synthetic aperture and spatial coded excitation,” Proc. SPIE, Medical Imaging, Ultrasonic Imaging and Tomography, April 2016, vol. 9790, pp. 97901Z-1-97901Z-7.

L. F. Xu, T. C. Yu, X. Feng, C. P. Yang, Y. Chen, W. Chen, and J. Zhou, “Dimension dependence of thickness resonance behavior of piezoelectric fiber composites,” Materials Chemistry and Physics, vol. 218, pp. 34-38, October 2018.

B. Ren and C. J. Lissenden, “Modeling guided wave excitation in plates with surface mounted piezoelectric elements: coupled physics and normal mode expansion,” Smart Materials and Structures, vol. 27, 045014, 2018.

A. Mohammadabadi and R. Dugnani, “Design and Evaluation of a Novel Low Acoustic Impedance-Based PZT Transducer for Detecting the Near-Surface Defects,” International Journal of Engineering and Technology Innovation, vol. 9, no. 3, pp. 196-211, 2019.

V. K. Chillara, E. S. Davis, C. Pantea, and D. N. Sinha, “Ultrasonic Bessel beam generation from radial modes of piezoelectric discs,” Ultrasonics, vol. 96, pp. 140-148, July 2019.

E. Stytsenko, M. Meijer, and N. L. Scott, “Cross-coupling control in linear and 2D arrays,” Proc. OCEANS-MTS/IEEE Kobe Techno-Oceans (OTO), May 2018.

Downloads

Published

2019-09-10

How to Cite

[1]
A. Bybi, S. Grondel, A. Mzerd, C. Granger, M. Garoum, and J. Assaad, “Investigation of Cross-Coupling in Piezoelectric Transducer Arrays and Correction”, Int. j. eng. technol. innov., vol. 9, no. 4, pp. 287–301, Sep. 2019.

Issue

Section

Articles

Most read articles by the same author(s)