Design and Performance Analysis of Band Pass Filter Using Frequency Selective Surface for 5G Communication

Authors

  • Muhammad Haroon Tariq ALBA-The American College of Greece, Athens, Greece
  • Muhammad Noaman Zahid School of Information, Hunan University of Humanities, Science and Technology, Loudi, China

DOI:

https://doi.org/10.46604/peti.2023.9313

Keywords:

frequency selective surface, bandpass filter, resonance, WiMAX, WLAN

Abstract

In recent years, frequency selective surfaces (FSSs) have been extensively investigated in terms of their design and practical applications at microwave and optical frequencies. This study proposes a new design of a FSS layer, which is directly placed over the surface of an antenna to enhance its characteristics such as directivity, frequency selectivity, radiation efficiency, and gain. In the proposed design, two different substrates are used to analyze the improved performance of the FSS layer. For this purpose, FR-4 Epoxy and Duroid 5880 are used for cost effectiveness and to achieve the optimized performance of the antenna. The simulated and measured results are in good agreement, indicating the enhanced performance of antenna for WLAN and WiMAX applications. Finally, it is concluded that the proposed FSS layer ensures the best possible results of the filtering response as the first null gives divergence of more than 10 dB with its peak value layer.

References

C. Kumar, M. I. Pasha, and D. Guha, “Defected Ground Structure Integrated Microstrip Array Antenna for Improved Radiation Properties,” IEEE Antennas and Wireless Propagation Letters, vol. 16, pp. 310-312, May 2016.

R. S. Anwar, L. Mao, and H. Ning, “Frequency Selective Surfaces: A Review,” Applied Sciences, vol. 8, no. 9, article no. 1689, September 2018.

B. A. Munk, Finite Antenna Arrays and FSS, New York: John Wiley and Sons, 2003.

H. Zhu, Y. Yu, X. Li, and B. Li, “A Wideband and High Gain Dual-Polarzied Antenna Design by a Frequency Selective Surface for WLAN Applications,” Progress in Electromagnetics Research C, vol. 54, pp. 57-66, October 2014.

L. Y. Seng, M. F. A. Malek, W. F. Hoon, L. W. Leong, N. Saudin, L. Mohamed, et al., “Frequency Selective Surface for Enhance WLAN Applications,” IEEE Symposium on Wireless Technology and Applications, pp. 81-84, September 2012.

D. Z. Zhu, M. D. Gregory, P. L. Werner, and D. H. Werner, “Fabrication and Characterization of Multiband Polarization Independent 3-D-Printed Frequency Selective Structures with Ultrawide Fields of View,” IEEE Transactions on Antennas and Propagation, vol. 66, no. 11, pp. 6096-6105, November 2018.

J. Romeu and Y. Rahamat-Samii, “Fractal FSS: A Novel Dual-Band Frequency Selective Surface,” IEEE Transactions on Antennas and Propagation, vol. 48, no. 7, pp. 1097-1105, July 2000.

T. K. Wu and R. P. Verdes, Wideband Gridded Square Frequency Selective Surface, U.S. Patent, 4814785, 1989.

A. Chatterjee and S. Paraui, “A Dual Layer Frequency Selective Surface Reflector for Wideband Applications,” Radioengineering, vol. 25, no. 1, pp. 67-72, April 2016.

R. Sivasamy, B. Moorthy, M. Kanagasabai, V. R. Samsingh, and M. G. N. Alsath, “A Wideband Frequency Tunable FSS for Electromagnetic Shielding Applications,” IEEE Transactions on Electromagnetic Compatibility, vol. 60, no. 1, pp. 280-283, February 2018.

M. Majidzadeh, C. Ghobadi, and J. Nourinia, “Quadruple Filtering Mechanism through an Effective Sketch of Reconfigurable Frequency Selective Surface,” IET Microwaves, Antennas, and Propagation, vol. 10, no. 15, pp. 1605-1612, December 2016.

M. Majidzadeh, C. Ghobadi, and J. Nourinia, “Novel Single Layer Reconfigurable Frequency Selective Surface with UWB and Multi-Band Modes of Operation,” AEÜ—International Journal of Electronics and Communications, vol. 70, no. 2, pp. 151-161, February 2016.

M. Majidzadeh, C. Ghobadi, and J. Nourinia, “A Reconfigurable Frequency-Selective Surface for Dual-Mode Multi-Band Filtering Applications,” International Journal of Electronics, vol. 104, no. 3, pp. 369-381, 2017.

E. Braz and A. Campos, “Dual/Wide Band Multifractal Frequency Selective Surface for Applications in S and X Band,” Microwave and Optical Technology Letters, vol. 56, no. 10, pp. 2217-2222, October 2014.

S. Yadav, C. P. Jain, and M. M. Sharma, “Smartphone Frequency Shielding with Penta-Bandstop FSS for Security and Electromagnetic Health Applications,” IEEE Transactions on Electromagnetic Compatibility, vol. 61, no. 3, pp. 887-892, June 2019.

D. Xie, X. Liu, H. Guo, X. Yang, C. Liu, and L. Zhu, “A Wideband Absorber with a Multiresonant Gridded-Square FSS for Antenna RCS Reduction,” IEEE Antennas and Wireless Propagation Letters, vol. 16, pp. 629-632, July 2016.

M. Z. Joozdani, M. K. Amirhosseini, and A. Abdolali, “Wideband Radar Cross-Section Reduction of Patch Array Antenna with Miniaturised Hexagonal Loop Frequency Selective Surface,” Electronics Letters, vol. 52, no. 9, pp. 767-768, April 2016.

M. N. Zahid, J. Jiang, N. Ashraf, and M. S. Nazir, “Tri-Band Circularly Polarized Micro-Strip Patch Antenna for GPS and DVB-H Applications,” 16th International Bhurban Conference on Applied Sciences and Technology, pp. 1029-1033, January 2019.

S. B. Paiva, V. P. S. Neto, and A. G. D’Assunção, “A New Compact, Stable, and Dual-Band Active Frequency Selective Surface with Closely Spaced Resonances for Wireless Applications at 2.4 and 2.9 GHz,” IEEE Transactions on Electromagnetic Compatibility, vol. 62, no. 3, pp. 691-697, June 2020.

P. B. Nayak, S. Verma, and P. Kumar, “A Novel Compact Tri-Band Antenna Design for WiMAX, WLAN and Bluetooth Applications,” Twentieth National Conference on Communications, pp. 1-6, February-March 2014.

W. Yin, H. Zhang, T. Zhong, and X. Min, “A Novel Compact Dual-Band Frequency Selective Surface for GSM Shielding by Utilizing a 2.5-Dimensional Structure,” IEEE Transactions on Electromagnetic Compatibility, vol. 60, no. 6, pp. 2057-2060, December 2018.

S. Ünaldı, S. Çimen, G. Çakır, and U. E. Ayten, “A Novel Dual-Band Ultrathin FSS with Closely Settled Frequency Response,” IEEE Antennas and Wireless Propagation Letters, vol. 16, pp. 1381-1384, December 2016.

B. A. Munk, Frequency Selective Surfaces: Theory and Design, Hoboken: John Wiley and Sons, 2000.

U. Farooq, M. F. Shafique, and M. J. Mughal, “Polarization Insensitive Dual Band Frequency Selective Surface for RF Shielding through Glass Windows,” IEEE Transactions on Electromagnetic Compatibility, vol. 62, no. 1, pp. 93-100, February 2020.

Y. Z. Sun, L. X. Ran, L. Peng, W. G. Wang, T. Li, X. Zhao, et al., “The Research of High-Directive Anisotropic Magnetic Metamaterial Antenna Loaded with Frequency-Selective Surface,” Chinese Physics B, vol. 18, no. 1, article no. 174, January 2009.

Downloads

Published

2023-01-01

How to Cite

[1]
Muhammad Haroon Tariq and Muhammad Noaman Zahid, “Design and Performance Analysis of Band Pass Filter Using Frequency Selective Surface for 5G Communication”, Proc. eng. technol. innov., vol. 23, pp. 15–22, Jan. 2023.

Issue

Section

Articles