Experimental Study of Leaching and Penetration of Nitrite ions in Nitrite-type Repair Materials on the Surface of Concrete

Authors

  • Masumi Inoue Department of Civil and Environmental Engineering, Kitami Institute of Technology, Hokkaido, Japan
  • Heesup Choi Department of Civil and Environmental Engineering, Kitami Institute of Technology, Hokkaido, Japan
  • Yuhji Sudoh Chemicals Division. Basic Chemicals Department, Nissan Chemical Industries, Ltd., Tokyo, Japan
  • Koichi Ayuta Department of Civil and Environmental Engineering, Kitami Institute of Technology, Hokkaido, Japan

Keywords:

Nitrite-type repair material, nitrite ion, leaching, penetration, polymer cement mortar, polymer cement paste

Abstract

This study aimed to clarify the leaching properties of nitrite ions in nitrite-type repair materials exposed to rainfall. Repaired concrete specimens were prepared for leaching tests using a lithium nitrite solution, and the amounts of leaching and penetration of nitrite ions were measured under simulated rainfall. The results demonstrated that the amount of leaching could be controlled by using polymer cement paste and mortar surface coatings containing lithium nitrite solution, and by using polymer cement mortar surface coatings following direct lithium nitrite solution coatings. Furthermore, the amount of nitrite ion leaching in all cases was lower than the discharge standard value established by the water pollution control law.

Downloads

Published

2017-01-01

How to Cite

[1]
M. Inoue, H. Choi, Y. Sudoh, and K. Ayuta, “Experimental Study of Leaching and Penetration of Nitrite ions in Nitrite-type Repair Materials on the Surface of Concrete”, Adv. technol. innov., vol. 2, no. 1, pp. 22–24, Jan. 2017.

Issue

Vol. 2 No. 1 (2017): January

Section

Articles

License

Submission of a manuscript implies: that the work described has not been published before that it is not under consideration for publication elsewhere; that if and when the manuscript is accepted for publication. Authors can retain copyright in their articles with no restrictions. is accepted for publication. Authors can retain copyright of their article with no restrictions.

 

Since Jan. 01, 2019, AITI will publish new articles with Creative Commons Attribution Non-Commercial License, under The Creative Commons Attribution Non-Commercial 4.0 International (CC BY-NC 4.0) License.
The Creative Commons Attribution Non-Commercial (CC-BY-NC) License permits use, distribution and reproduction in any medium, provided the original work is properly cited and is not used for commercial purposes.