CPW-Fed Penta Band Monopole Antenna for Multiservice Wireless Applications
A compact triple T-shaped stub with meander loaded strip antenna for penta band applications is proposed. The rectangular patch antenna with meandered and open-ended slot cuts is utilized to realize four operating bands at 2.45 GHz, 3.1 GHz, 5.3 GHz, and 6.5 GHz with an impedance bandwidth of 400 MHz (2.15-2.550 GHz), 1000 MHz (2.7-3.7 GHz), 200 MHz (5.4-5.6 GHz), and 200 MHz (6.4-6.6 GHz), respectively. For an additional resonance frequency, the length of the central T-shaped stub is slightly modified which causes the variation in the current distribution. As a result, the resonance frequency of 5.5 GHz is divided into two resonance frequency bands which are operating at 5.25 GHz and 5.85 GHz with an impedance bandwidth of 100 MHz (5.25-5.35 GHz) and 200 MHz (5.75-5.95 GHz), respectively. Furthermore, a parametric reflection coefficient and surface current distribution analysis is carried out to understand the strip and slot behavior at resonance frequency bands. Finally, a prototype is fabricated and its reflection coefficient, gain, and radiation pattern are measured. The experimental result shows that the proposed antenna is reliable for penta band applications.
J. F. Huang, M. T. Wu, and J. Y. Wen, “A Compact Triple-Band Antenna Design for UMTS WLAN and WiMAX Applications,” Microwave and Optical Technology Letters, vol. 51, no. 9, pp. 2207-2212, September 2009.
H. W. Liu and C. H. Ku, “Novel Planar Triple-Band Monopole Antenna for WiMAX/WLAN Applications,” Microwave and Optical Technology Letters, vol. 52, no. 11, pp. 2405-2408, November 2010.
V. Kollipara, S. Peddakrishna, and J. Kumar, “Planar EBG Loaded UWB Monopole Antenna with Triple Notch Characteristics,” International Journal of Engineering and Technology Innovation, vol. 11, no. 4, pp. 294-304, September 2021.
S. Patil, V. Kapse, S. Sharma, and A. K. Pandey, “Low Profile Wideband Dual-Ring Slot Antenna for Biomedical Applications,” Proceedings of Engineering and Technology Innovation, vol. 19, pp. 38-44, August 2021.
A. Kumar and A. P. S. Pharwaha, “Design and Optimization of Micro-Machined Sierpinski Carpet Fractal Antenna Using Ant Lion Optimization,” International Journal of Engineering and Technology Innovation, vol. 10, no. 4, pp. 306-318, September 2020.
R. Kumar and Y. Kamatham, “Compact Tri-Band Monopole Antenna for 2.4/5.8 GHz WLAN and 8.3 GHz ITU-T Applications,” IEEE International Conference on Electrical, Computer, and Communication Technologies, October 2019, pp. 1-4.
U. Chakraborty, S. Chatterjee, S. K. Chowdhury, and P. P. Sarkar, “A Compact Microstrip Patch Antenna for Wireless Communication,” Progress in Electromagnetics Research C, vol. 18, pp. 211-220, April 2012.
Y. L. Kuo, Y. T. Cheng, and K. L. Wong, “Printed Inverted-F Antennas for Applications in Wireless Communication,” IEEE Antennas and Propagation Society International Symposium, June 2002, pp. 454-457.
Y. L. Kuo and K. L. Wong, “Printed Double-T Monopole Antenna for 2.4/5.2 GHz Dual-Band WLAN Operations,” IEEE Transactions on Antennas and Propagation, vol. 51, no. 9, pp. 2187-2192, November 2003.
J. W. Wu, H. M. Hsiao, J. H. Lu, and Y. D. Wang, “Dual-Broadband T-Shaped Monopole Antenna for Wireless Communication,” IEEE Antennas and Propagation Society International Symposium, July 2005, pp. 470-473.
M. K. Khandelwal, B. Kanaujia, S. Dwari, S. Kumar, and A. K. Gautam, “Analysis and Design of Dual-Band Compact Stacked Microstrip Patch Antenna with Defected Ground Structure for WLAN/WiMAX Applications,” International Journal of Electronics and Communications, vol. 69, no. 1, pp. 39-47, January 2015.
H. Li, L. Kang, D. W. Mi, and Y. Z. Yin, “Simple Dual Band-Notched UWB Antenna Loaded with Single U-Shaped Resonator,” Microwave and Optical Technology Letters, vol. 57, no. 9, pp. 2129-2134, September 2015.
L. Xu, Z. Y. Xin, and J. He, “A Compact Triple-Band Fork-Shaped Antenna for WLAN/WiMAX Applications,” Progress in Electromagnetics Research Letters, vol. 40, pp. 61-69, January 2013.
V. K. Pandit and A. R. Harish, “A Compact CPW-Fed Triple-Band Monopole Antenna for WLAN/WiMAX Applications,” Asia-Pacific Microwave Conference, December 2016, pp. 1-4.
L. Chouti, I. Messaoudene, T. A. Denidni, and A. Benghalia, “Triple-Band CPW-Fed Monopole Antenna for WLAN/WiMAX Applications,” Progress in Electromagnetics Research Letters, vol. 69, pp. 1-7, June 2017.
R. Pandeeswari and S. Raghavan, “A CPW Fed Triple-Band OCSRR Embedded Monopole Antenna with Modified Ground for WLAN and WiMAX Applications,” Microwave and Optical Technology Letters, vol. 57, no. 10, pp. 2413-2418, October 2015.
A. Kumar, D. Jhanwar, and M. M. Sharma, “A Compact Printed Multistubs Loaded Resonator Rectangular Monopole Antenna Design for Multiband Wireless System,” International Journal of RF and Microwave Computer-Aided Engineering, vol. 27, no. 9, e21147, November 2017.
K. A. Khan and S. M. Nokerov, “Optimization of Multi-Band Characteristics in Fan-Stub Shaped Patch Antenna for LTE (CBRS) and WLAN Bands,” Proceedings of Engineering and Technology Innovation, vol. 18, pp. 25-35, April 2021.
N. Kumawat, S. Gurjar, and Sunita, “A Compact Triple and Quadruple Band Antenna for Bluetooth/WiMAX/WLAN/ X-Band Applications,” Proceedings of International Conference on ICT for Sustainable Development, July 2015, pp. 1-10.
K. Yu, Y. Li, and X. Luo, “A CPW-Fed Quad-Band Monopole Antenna for L-Band, WLAN and WiMAX Communication Applications,” IEEE Progress in Electromagnetic Research Symposium, August 2016, pp. 1-5.
A. Khan, S. I. Naqvi, F. Arshad, Y. Amin, and H. Tenhunen, “A Compact Quad-Band CPW-Fed Planar Resonator for Multiple Wireless Communication Applications,” Applied Computational Electromagnetics Society Journal, vol. 32, no. 11, pp. 1001-1007, December 2017.
D. Sarkar, K. Saurav, K. V. Srivastava, and S. Awasthi, “A Compact Penta-Band CPW-Fed Monopole Antenna Using LC Resonator and Interdigital Capacitor,” IEEE Applied Electromagnetics Conference, December 2015, pp. 18-21.
R. Kumar and Y. Kamatham, “Design of Compact Quad Band Monopole Antenna Using Open-Ended and Meandered Slot,” International Conference on Innovations in Electrical and Electronics Engineering, January 2021, pp. 627-634.
Copyright (c) 2021 Raj Kumar, Yedukondalu Kamatham, Samineni Peddakrishna, Ajitha Gaddam
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Submission of a manuscript implies: that the work described has not been published before that it is not under consideration for publication elsewhere; that if and when the manuscript is accepted for publication. Authors can retain copyright in their articles with no restrictions. is accepted for publication. Authors can retain copyright of their article with no restrictions.
Since Jan. 01, 2019, AITI will publish new articles with Creative Commons Attribution Non-Commercial License, under The Creative Commons Attribution Non-Commercial 4.0 International (CC BY-NC 4.0) License.
The Creative Commons Attribution Non-Commercial (CC-BY-NC) License permits use, distribution and reproduction in any medium, provided the original work is properly cited and is not used for commercial purposes.