DV-EXCCCII Based Resistor-Less Current-Mode Universal Biquadratic Filter

Authors

  • Priyanka Singh Department of Electronics and Communication Engineering, Motilal Nehru National Institute of Technology Allahabad, India
  • Rajendra kumar nagaria Department of Electronics and Communication Engineering, Motilal Nehru National Institute of Technology Allahabad, India

DOI:

https://doi.org/10.46604/aiti.2023.9283

Keywords:

biquad filter, DV-EXCCCII, electronically tunable, analog building block, current-mode filter

Abstract

This study aims to present a new resistor-less current-mode multi-input single-output universal filter. The current-mode’s design approach is used to obtain the proposed circuit. This circuit employs a single differential voltage extra-X current controlled current conveyor (DV-EXCCCII) and two grounded capacitors. This multifunction filter circuit offers low-pass, high-pass, all-pass, band-pass, and band-reject filters at a single output terminal without passive component matching constraints. The same circuit topology can obtain all second-order filter functions with different input conditions. The proposed circuit design is electronically adjustable with the bias current of DV-EXCCCII. Because of its high output impedance, this arrangement is suitable for cascading other current-mode circuits. The proposed circuit is simulated by Cadence Spectre with 0.18 µm UMC CMOS technology process parameters at ± 0.9 V supply voltages. The simulation results agree well with the theoretical concept of the proposed circuit.

References

C. N. Lee, “Multiple-Mode OTA-C Universal Biquad Filters,” Circuits, Systems, and Signal Processing, vol. 29, no. 2, pp. 263-274, April 2010.

A. Sedra and K. Smith, “A Second Generation Current Conveyor and its Applications,” IEEE Transactions on Circuit Theory, vol. 17, no. 1, pp. 132-134, February 1970.

E. Yuce and S. Minaei, “Universal Current‐Mode Filters and Parasitic Impedance Effects on the Filter Performances,” International Journal of Circuit Theory and Applications, vol. 36, no. 2, pp. 161-171, April 2008.

F. Yucel and E. Yuce, “Grounded Capacitor Based Fully Cascadable Electronically Tunable Current-Mode Universal Filter,” AEÜ–International Journal of Electronics and Communications, vol. 79, pp. 116-123, September 2017.

A. Abaci and E. Yuce, “A New DVCC+ Based Second-Order Current-Mode Universal Filter Consisting of Only Grounded Capacitors,” Journal of Circuits, Systems, and Computers, vol. 26, no. 9, article no. 1750130, February 2017.

H. P. Chen, “Tunable Versatile Current-Mode Universal Filter Based on Plus-Type DVCCs,” AEÜ–International Journal of Electronics and Communications, vol. 66, no. 4, pp. 332-339, April 2012.

D. Nand and N. Pandey, “New Configuration for OFCC-Based CM SIMO Filter and Its Application as Shadow Filter,” Arabian Journal for Science and Engineering, vol. 43, no. 6, pp. 3011-3022, June 2018.

N. Pandey, D. Nand, and Z. Khan, “Single-Input Four-Output Current Mode Filter Using Operational Floating Current Conveyor,” Active and Passive Electronic Components, vol. 2013, article no. 318560, June 2013.

A. Yesil and F. Kacar, “Band-Pass Filter with High Quality Factor Based on Current Differencing Transconductance Amplifier and Current Amplifier,” AEU–International Journal of Electronics and Communications, vol. 75, pp. 63-69, May 2017.

J. W. Horng, “High Output Impedance Current-Mode Universal Biquadratic Filters with Five Inputs Using Multi-Output CCIIs,” Microelectronics Journal, vol. 42, no. 5, pp. 693-700, May 2011.

J. W. Horng, “Current-Mode and Transimpedance-Mode Universal Biquadratic Filter Using Multiple Outputs CCIIs,” Indian Journal of Engineering and Materials Sciences, vol. 17, no. 3, pp. 169-174, June 2010.

D. Prasad, D. R. Bhaskar, and M. Srivastava, “Universal Current-Mode Biquad Filter Using a VDTA,” Circuits and Systems, vol. 4, no. 1, pp. 32-36, January 2013.

N. Hassen, T. Ettaghzouti, K. Garradhi, and K. Besbes, “MISO Current Mode Bi-Quadratic Filter Employing High Performance Inverting Second Generation Current Conveyor Circuit,” AEÜ–International Journal of Electronics and Communications, vol. 82, pp. 191-201, December 2017.

F. Kacar, A. Yesil, and H. Kuntman, “Current-Mode Biquad Filters Employing Single FDCCII,” Radioengineering, vol. 21, no. 4, pp. 1269-1278, December 2012.

W. Tangsrirat, “Single-Input Three-Output Electronically Tunable Universal Current-Mode Filter Using Current Follower Transconductance Amplifiers,” AEU–International Journal of Electronics and Communications, vol. 65, no. 10, pp. 783-787, October 2011.

S. Roy, T. K. Paul, S. Maiti, and R. R. Pal, “Voltage Differencing Current Conveyor Based Voltage-Mode and Current-Mode Universal Biquad Filters with Electronic Tuning Facility,” International Journal of Engineering and Technology Innovation, vol. 11, no. 2, pp. 146-160, January 2021.

J. Satansup and W. Tangsrirat, “Single-Input Five-Output Electronically Tunable Current-Mode Biquad Consisting of Only ZC-CFTAs and Grounded Capacitors,” Radioengineering, vol. 20, no. 3, pp. 650-655, September 2011.

W. Chunhua, A. U. Keskin, L. Yang, Z. Qiujing, and D. Sichun, “Minimum Configuration Insensitive Multifunctional Current-Mode Biquad Using Current Conveyors and All-Grounded Passive Components,” Radioengineering, vol. 19, no. 1, pp. 178-184, April 2010.

C. Wang, J. Xu, A. U. Keskin, S. Du, and Q. Zhang, “A New Current-Mode Current-Controlled SIMO Type Universal Filter,” AEU–International Journal of Electronics and Communications, vol. 65, no. 3, pp. 231-234, March 2011.

K. K. Abdalla, “Universal Current-Mode Biquad Employing Dual Output Current Conveyors and MO-CCCA with Grounded Passive Elements,” Circuits and Systems, vol. 4, no. 1, pp. 83-88, January 2013.

S. V. Singh and S. Maheshwari, “Current-Processing Current-Controlled Universal Biquad Filter,” Radioengineering, vol. 21, no. 1, pp. 317-323, April 2012.

J. W. Horng, “Three-Input-One-Output Current-Mode Universal Biquadratic Filter Using One Differential Difference Current Conveyor,” Indian Journal of Pure and Applied Physics, vol. 52, no. 8, pp. 556-562, August 2014.

D. Agrawal and S Maheshwari, “An Active-C Current-Mode Universal First-Order Filter and Oscillator,” Journal of Circuits, Systems, and Computers, vol. 28, no. 13, article no. 1950219, January 2019.

P. Singh and RK Nagaria, “Electronically Tunable DV-EXCCCII-Based Universal Filter,” International Journal of Electronics Letters, vol. 9, no. 3, pp. 301-317, February 2020.

M. P. P. Wai, W Jaikla, S Siripongdee, A. Chaichana, and P. Suwanjan, “Electronically Tunable TISO Voltage-Mode Universal Filter Using Two LT1228s,” International Journal of Engineering and Technology Innovation, vol. 12, no. 1, pp. 62-74, January 2022.

R. Singh and D. Prasad, “Novel Current-Mode Universal Filter Using Single FTFNTA,” Indian Journal of Pure and Applied Physics, vol. 58, no. 8, pp. 599-604, August 2020.

A. Kumar and B. Chaturvedi, “Novel CMOS Dual-X Current Conveyor Transconductance Amplifier Realization with Current-Mode Multifunction Filter and Quadrature Oscillator,” Circuits, Systems, and Signal Processing, vol. 37, no. 6, pp. 2250-2277, June 2018.

W. Jongchanachavawat, M. Kumngern, and S. Lerkvaranyu, “Voltage/Current-Mode Universal Filter Using Single FDCCII,” 16th International Conference on Electrical Engineering/Electronics, Computer, Telecommunications, and Information Technology, pp. 705-708, July 2019.

A. Fabre, O. Saaid, and H. Barthelemy, “On the Frequency Limitations of the Circuits Based on Second Generation Current Conveyors,” Analog Integrated Circuits and Signal Processing, vol. 7, no. 2, pp. 113-129, March 1995.

Downloads

Published

2023-01-01

How to Cite

[1]
P. Singh and R. kumar nagaria, “DV-EXCCCII Based Resistor-Less Current-Mode Universal Biquadratic Filter”, Adv. technol. innov., vol. 8, no. 1, pp. 12–28, Jan. 2023.

Issue

Section

Articles