Multifeatured Electronic Helmet to Enhance Road Safety and Rider’s Comfort
DOI:
https://doi.org/10.46604/peti.2024.13598Keywords:
smart helmet, accident detection, road safety technology, wearable safety devices, IoT-based safety systemsAbstract
This paper presents a multi-featured electronic helmet designed to tackle critical road safety issues, including accidents, drunk driving, and over-speeding. The design incorporates a global system for mobile communications (GSM) and global positioning system (GPS) modules to accurately capture driver’s current location and send messages to predefined contacts. When encountering an accident, the helmet promptly notifies designated contacts and authorities, ensuring swift assistance. By integrating features for detecting over-speeding, accidents, and drunk driving, the helmet renders real-time alerts to both the driver’s family and traffic police, enhancing accountability and safety measures. Additionally, the helmet includes solar charging functionality for mobile devices receive 100% charged in 3.37 hours, thereby optimizing usability and emergency communication. A rain detection system protects mobile devices, while an internal warming mechanism caters to adverse weather conditions, and proffers enhanced comfort by maintaining internal form temperature between 26-27 ℃ and safety, especially in cold regions or for military personnel.
References
S. Tapadar, S. Ray, H. N. Saha, A. K. Saha, and R. Karlose, “Accident and Alcohol Detection in Bluetooth Enabled Smart Helmets for Motorbikes,” IEEE 8th Annual Computing and Communication Workshop and Conference, pp. 584-590, January 2018.
P. Mishra, P. Pai, P. Singh, V. Kayande, and M. Parmar, “Implementation of a Smart Helmet With Alcohol and Fall Detection and Navigation System,” International Conference on Innovative Computing and Communications, vol. 2, pp. 239-251, 2022.
P. Lee, H. Kim, M. S. Zitouni, A. Khandoker, H. F. Jelinek, L. Hadjileontiadis, et al., “Trends in Smart Helmets With Multimodal Sensing for Health and Safety: Scoping Review,” JMIR mHealth and uHealth, vol. 10, no. 11, article no. e40797, November 2022.
Y. Chen, Y. Jie, J. Zhu, Q. Lu, Y. Cheng, X. Cao, et al., “Hybridized Triboelectric-Electromagnetic Nanogenerators and Solar Cell for Energy Harvesting and Wireless Power Transmission,” Nano Research, vol. 15, no. 3, pp. 2069-2076, March 2022.
X. Zhou, J. Nie, B. Song, Q. Yang, X. Xu, J. Xu, et al., “Ergonomic Evaluation of Thermal Comfort for Different Outlet Distribution Patterns and Ventilation Conditions in the Pilot Protective Helmet,” Applied Thermal Engineering, vol. 226, article no. 120355, May 2023.
N. Neha, B. S. Krishnaprasad, and M .L. J. Shruthi, “Real-Time Alcohol Detection and Response System With Arduino and MQ-3 Sensor Integration,” 7th International Conference on I-SMAC (IoT in Social, Mobile, Analytics and Cloud), pp. 1095-1103, October 2023.
A. B. Lakshmi, C. Ragunath, R. Yeswanth, and M. Rajkumar, “Smart Helmet for Riders to Avoid Accidents Using IoT,” 2nd International Conference on Computer, Communication and Control, pp. 1-4, February 2024.
J. White, C. Thompson, H. Turner, B. Dougherty, and D. C. Schmidt, “Wreckwatch: Automatic Traffic Accident Detection and Notification With Smartphones,” Mobile Networks and Applications, vol. 16, no. 3, pp. 285-303, June 2011.
X. Zou, P. Thiruvenkatanathan, and A. A. Seshia, “A Seismic-Grade Resonant MEMS Accelerometer,” Journal of Microelectromechanical Systems, vol. 23, no. 4, pp. 768-770, August 2014.
K. Y. Koo, D. Hester, and S. Kim, “Time Synchronization for Wireless Sensors Using Low-Cost GPS Module and Arduino,” Frontiers in Built Environment, vol. 4, article no. 82, January 2019.
S. Sharma, K. K. Jain, and A. Sharma, “Solar Cells: In Research and Applications—A Review,” Materials Sciences and Applications, vol. 6, no. 12, pp. 1145-1155, December 2015.
C. Udayasri, M. Lavanya, and M Arivalagan, “Solar Based Adjustable Voltage Regulator Using IC LM317,” Journal of Chemical and Pharmaceutical Sciences, no. 5, pp. 273-275, October 2016.
J. Ducloux, P. Petrashin, W. Lancioni, and L. Toledo, “Embedded USB Dual-Role System for Communication With Mobile Devices,” Argentine School of Micro-Nanoelectronics, Technology and Applications, pp. 1-7, August 2011.
S. Mudi, “Design and Construction of a Portable Solar Mobile Charger,” World Academics Journal of Engineering Science, vol. 7, no. 1, pp. 40-44, March 2020.
H. Chowdhury and M. T. Islam, “Multiple Chargers With Adjustable Voltage Using Solar Panel,” International Conference on Mechanical Engineering and Renewable Energy, article no. 1-6, November 2015.
C. Iyen, B. Ayomanor, A. Orume, S. Saleh, S. Jaafaru, and B. J. Akeredolu, “Design and Construction of a Rain Detector With an Alarm System,” FUW Trends in Science & Technology Journal, vol. 5, no. 3, pp. 686-690, December 2020.
S. Das, S. Mondal, S. Banerjee, and K. Pal, “A Novel Agronomical Technology for Polar Region’s Cultivation During Winter Dark,” 5th International Conference on Electronics, Materials Engineering & Nano-Technology, pp. 1-6, September 2021.
S. F. Perdana, “AC 220V Digital Thermostat Based Drying Oven XH-W3001 to Improve Temperature Accuracy in the Drying Process of Black Betel Leaves (Piper Betle Var Nigra) at PT. FBION Karanganyar,” 2nd International Conference on Early Childhood Education in Multiperspective, vol. 2, pp. 395-406, 2023.
S. Lee, G. Tewolde, and J. Kwon, “Design and Implementation of Vehicle Tracking System Using GPS/GSM/GPRS Technology and Smartphone Application,” IEEE World Forum on Internet of Things, pp. 353-358, March 2014.
J. Baramy, P. Singh, A. Jadhav, K. Javir, and S. Tarleka, “Accident Detection & Alerting System,” International Journal of Technical Research and Applications, no. 39, pp. 8-11, March 2016.
S. U. Khan, N. Alam, S. U. Jan, and I. S. Koo, “IoT-Enabled Vehicle Speed Monitoring System,” Electronics, vol. 11, no. 4, article no. 614, February 2022.
K. Maheswari, U. Madhumitha, S. Madhusurya, and T. Divya, “Alcohol Consumption Detection Using Smart Helmet System,” International Journal of Scientific Research in Science, Engineering and Technology, vol. 7, no. 2, pp. 167-173, March-April 2020.
T. Kunatsa, H. C. Myburgh, and A. De Freitas, “Optimal Power Flow Management for a Solar PV-Powered Soldier-Level Pico-Grid,” Energies, vol. 17, no. 2, article no. 459, January 2024.
H. A. Attia, B. N. Getu, H. Ghadban, and A. K. A. Mustafa, “Portable Solar Charger with Controlled Charging Current for Mobile Phone Devices,” International Journal of Thermal & Environmental Engineering, vol. 7, no. 1, pp. 17-24, 2014.
T. Amosun and W. O. Adedeji, “Design of a PLC Based Temperature Controlled System,” REM (Rekayasa Energi Manufaktur) Journal, vol. 8, no. 2, pp. 93-100, December 2023.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Vijay Mahadev Mane, Harshal Ambadas Durge
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Submission of a manuscript implies: that the work described has not been published before that it is not under consideration for publication elsewhere; that if and when the manuscript is accepted for publication. Authors can retain copyright of their article with no restrictions. Also, author can post the final, peer-reviewed manuscript version (postprint) to any repository or website.
Since Oct. 01, 2015, PETI will publish new articles with Creative Commons Attribution Non-Commercial License, under The Creative Commons Attribution Non-Commercial 4.0 International (CC BY-NC 4.0) License.
The Creative Commons Attribution Non-Commercial (CC-BY-NC) License permits use, distribution and reproduction in any medium, provided the original work is properly cited and is not used for commercial purposes