A New Method of Technical Analysis to Optimise the Design of Low Impact Energy Systems for Buildings
Keywords:
RETScreen, TRNSYS, historical buildings, energy efficiency, conditioning, CCHPAbstract
Energy consumption for civil constructions represents about 40% of total energy requirements, so it is necessary to achieve the goal of energy savings and the consequent reduction of greenhouse gases emissions. The study in content aims to provide a design methodology enables to identify the best plant configuration for buildings from a technical, economic and environmental point of view. To assess validity of the calculation model, an analysis of an historical building was carried out in combination with two softwares of proven reliability: TRNSYS, used to evaluate the thermal demand of users, and RETScreen, used to estimate the validity of the chosen energy model.References
F. Armanasco, “Sperimentazione sul sistema trigenerativo con microturbina a gas e frigorifero ad assorbimento,” CESI Ricerca, 2009.
Ing. Bruno Frinzi, “Studio di fattibilità tecnico-economica di un impianto di rigenerazione in abbinamento ad un impianto fotovoltaico di uno stabilimento industriale,” Protecnos, 2009.
A. Simonetti, G. Corallo, R. Caria, L. Cipolletta, “Realizzazione dell’ impianto di solar cooling dell’ edificio F51 del centro ENEA della Casaccia - Monitoraggio dell’Impianto,” Enea, 2010.
“Analisi del potenziale della microgenerazione in Italia,” Federazione Italiana per l’uso razionale dell’Energia, FIRE, 2008.
E. Macchi, S. Campanari, P. Silvia, “La micro generazione a gas naturale,” Polipress, 2010.
G. Tomassetti, “Generazione distribuita e cogenerazione,” Le barriere alla diffusione – La termotecnica, 2003.
C. Belvedere, “Unità di micro generazione e piccola – Installazione ed esercizio – Procedure autorizzative semplificate,” Documento di proprosta, Cogena, 2007.
D. Di Santo, “Gli incentivi per l’efficienza energetica,” Corso Enea, FIRE per Energy Manager, 2006.
M. Grecchi, “Fiscalità e incentivi sulla micro generazione,” Senertec Gmbh - gruppo CTI, 2006.
Nikmat Ecopower, “Unità di cogenerazione e rigenerazione a gas naturale e biogas,” Divisione di DSF Tecnologia, 2005.
F. Bonfà, G. Caruso, I. De Santoli, G. Lo Basso, “Studio di un esempio dimostrativo di impiego di tecnologie energeticamente efficienti,” Enea, Citera, 2010.
M. Bianchi, P. Ruggero Spina, “Integrazione di sistemi cogenerativi innovativi di piccolissima taglia nelle reti di distribuzione dell’energia elettrica,” termica e frigorifera, Enea, Università di Ferrara, 2010.
John A. Jacobs III, M. Schneider, “Cogeneration application considerations,” GE Energy, 2009.
E. Macchi, G. Lozza, “Cogenerazione industriale. Dipartimento di energetica politecnico di Milano, “ 2007.
M.P. Boyce, “Handbook for cogeneration and combined cycle power plants,” New York, ASME, 2002.
S. Consonni, “Optimization of cogeneration systems operation. Part A: Prime movers modelization, in: Proceedings of the American society of mechanical engineers Cogen-Turbo international symposium on turbomachinery, combined-cycle technologies and cogeneration,” Nice, France, 1989.
J. Klimstra, C. Hattar, “Performance of natural gas. Fueled engine heading towards their optimum, in: Proceedings of the American society of mechanical engineers internal combustion engine division,” Spring Technical Conference, Aachen, Germany, ASME, 2006.
N. Petchers, “Combined heating, cooling & power handbook. Technologies & applications. An integrated approach to energy resources optimization,” Liburn (GA), The Fairmont, 2003.
L. Castellazzi, B. Di Pietra, “Studio e progettazione di un impianto di trigenerazione dimostrativo presso il centro ENEA di Casaccia,” Enea, 2010.
Externe, “Fuel cycles for emerging and end-use technologies,” Transport & Waste, 1999.
E. Cardona, A. Piacentino, “Optimal design of CHCP plants in the civil sctor by thermoeconomics,” Elsevier Applied Energy, 2007.
M. Rocchetti, “Celle a combustibile Stato di sviluppo e prospettive della tecnologia,” Enea, Ministro dello Sviluppo Economico, 2009.
L. Chiara Tagliabue, F. Leonforte, J. Compostella, “Renovation of an UNESCO heritage settlement in southern Italy: ASHP and BIPV for a ‘spread hotel’ project - Elsevier applied energy,” 2012.
D. Bosia, “Energetic behaviour and renewable energy in traditional rural architecture,” UNDP Croatia. United Nations Development Program, 2011.
G. Castanheira, L. Bragança, “Urban renovation of portuguese historical centres,” Universidade do Minho, Departamento de Engenharia Civil, 2012.
“BP statistical review of world energy,” bp.com/statisticalreview, June, 2012.
A. De Lieto Vollaro, R. De Lieto Vollaro, F. Salata, “Utilizzazione del software RETScreen per l’ottimizzazione di un impianto termotecnico: un caso studio,” Aicarr Journal, 2013.
Published
How to Cite
Issue
Section
License
Copyright Notice
Submission of a manuscript implies: that the work described has not been published before that it is not under consideration for publication elsewhere; that if and when the manuscript is accepted for publication. Authors can retain copyright in their articles with no restrictions. Also, author can post the final, peer-reviewed manuscript version (postprint) to any repository or website.
Since Jan. 01, 2019, IJETI will publish new articles with Creative Commons Attribution Non-Commercial License, under Creative Commons Attribution Non-Commercial 4.0 International (CC BY-NC 4.0) License.
The Creative Commons Attribution Non-Commercial (CC-BY-NC) License permits use, distribution and reproduction in any medium, provided the original work is properly cited and is not used for commercial purposes.
.jpg)
