A Novel Traveling Wave Fault Location Method Based on ICEEMDAN-NTEO for Distribution Network

Hongwen Liu; Yi Ma; Zihan Wang; Kaien Li; Jisheng Huang; Lanxi Bi

doi:10.46604/ijeti.2024.14100

Authors

Hongwen Liu Power Science Research Institute, Yunnan Power Grid Co., Ltd., Kunming, China
Yi Ma Power Science Research Institute, Yunnan Power Grid Co., Ltd., Kunming, China
Zihan Wang Changsha University of Science and Technology, Changsha, China
Kaien Li Lincang Power Supply Bureau, Yunnan Power Grid Co., Ltd., Lincang, China
Jisheng Huang Lincang Power Supply Bureau, Yunnan Power Grid Co., Ltd., Lincang, China
Lanxi Bi Changsha University of Science and Technology, Changsha, China

DOI:

https://doi.org/10.46604/ijeti.2024.14100

Keywords:

ICEEMDAN, NTEO, traveling wave (TW), distribution network (DN), fault location (FL)

Abstract

The traditional traveling wave fault location method is easily disturbed by load-side noise, which leads to low accuracy of traveling wave head identification and further leads to large location errors. This study aims to propose a new traveling wave fault location method based on ICEEMDAN-NTEO for distribution networks. By analyzing the frequency characteristics in the faulty traveling wave signal, the ICEEMDAN method is used to decompose the faulty signal and effectively filter out the noise components in the signal. The NTEO method is then used to calculate the energy values of the obtained modal components, enhancing the transient characteristics of the traveling wave. This method solves the problems of decomposition scale or modal aliasing that exist in traditional location methods and has higher anti-noise characteristics. Based on the accurate identification of the traveling wave head, this method further improves the accuracy of the traveling wave location in the distribution network.

References

N. N. Bon and L. V. Dai, “Fault Identification, Classification, and Location on Transmission Lines Using Combined Machine Learning Methods,” International Journal of Engineering & Technology Innovation, vol. 12, no. 2, pp. 91-109, February 2022.

F. Liu, L. Xie, K. Yu, Y. Wang, X. Zeng, L. Bi, et al., “A Novel Fault Location Method Based on Traveling Wave for Multi-Branch Distribution Network,” Electric Power Systems Research, vol. 224, article no. 109753, November 2023.

X. Cai and R. J. Wai, “Intelligent DC Arc-Fault Detection of Solar PV Power Generation System via Optimized VMD-Based Signal Processing and PSO-SVM Classifier,” IEEE Journal of Photovoltaics, vol. 12, no. 4, pp. 1058-1077, 2022.

C. R. Pratiwi, P. Kristalina, and A. Sudarsono, “A Performance Evaluation of Modified Weighted Pathloss Scenario Based on the Cluster Based-PLE for an Indoor Positioning of Wireless Sensor Network,” International Journal of Engineering & Technology Innovation, vol. 9, no. 1, pp. 61-74, January 2019.

O. D. Naidu and A. K. Pradhan, “Precise Traveling Wave-Based Transmission Line Fault Location Method Using Single-Ended Data,” IEEE Transactions on Industrial Informatics, vol. 17, no. 8, pp. 5197-5207, 2021.

K. Jia, D. W. P. Thomas, and M. Sumner, “A New Double-Ended Fault-Location Scheme for Utilization in Integrated Power Systems,” IEEE Transactions on Power Delivery, vol. 28, no. 2, pp. 594-603, 2013.

E. H. Shehab-Eldin and P. G. McLaren, “Travelling Wave Distance Protection-Problem Areas and Solutions,” IEEE Transactions on Power Delivery, vol. 3, no. 3, pp. 894-902, July 1988.

R. Zeng, L. Zhang, and Q. H. Wu, “Fault Location Scheme for Multi-Terminal Transmission Line Based on Frequency-Dependent Traveling Wave Velocity and Distance Matrix,” IEEE Transactions on Power Delivery, vol. 38, no. 6, pp. 3980-3990, December 2023.

D. Wang, B. Wang, W. Zhang, C. Zhang, and J. Yu, “Fault Location with High Precision of Flexible DC Distribution System Using Wavelet Transform and Convolution Neural Network,” Frontiers in Energy Research, vol. 9, article no. 804405, 2021.

J. Wang and Y. Zhang, “Traveling Wave Propagation Characteristic-Based LCC-MMC Hybrid HVDC Transmission Line Fault Location Method,” IEEE Transactions on Power Delivery, vol. 37, no. 1, pp. 208-218, February 2022.

H. K. R. Pillai, M. Nanappan, M. V. Prabhakaran, and S. P. Sathyabhama, “A Robust Technique for Detection, Diagnosis, and Localization of Switching Faults in Electric Drives Using Discrete Wavelet Transform,” International Journal of Engineering & Technology Innovation, vol. 13, no. 1, pp. 14-27, 2023.

D. Li, A. Ukil, K. Satpathi, and Y. M. Yeap, “Hilbert-Huang Transform Based Transient Analysis in Voltage Source Converter Interfaced Direct Current System,” IEEE Transactions on Industrial Electronics, vol. 68, no. 11, pp. 11014-11025, November 2021.

S. Liu, K. Han, H. Li, T. Zhang, and F. Chen, “A Two-Terminal Directional Protection Method for HVDC Transmission Lines of Current Fault Component Based on Improved VMD-Hilbert Transform,” Energies, vol. 16, no. 19, article no. 6987, October 2023.

V. K. Tiwari, A. C. Umarikar, and T. Jain, “Measurement of Instantaneous Power Quality Parameters Using UWPT and Hilbert Transform and Its FPGA Implementation,” IEEE Transactions on Instrumentation and Measurement, vol. 70, article no. 9000213, 2021.

X. Li, H. Li, Z. Yang, J. Zhou, H. Li, and J. Bu, “Radiation Signal Denoising Method of Loaded Coal-Rock Based on ICEEMDAN-PCK-Means-IP,” IEEE Sensors Journal, vol. 23, no. 19, pp. 23103-23118, October 2023.

T. Han, Q. Liu, L. Zhang, and A. C. C. Tan, “Fault Feature Extraction of Low Speed Roller Bearing Based on Teager Energy Operator and CEEMD,” Measurement, vol. 138, pp. 400-408, May 2019.

A. Subasi, A. S. Yilmaz, and K. Tufan, “Detection of Generated and Measured Transient Power Quality Events using Teager Energy Operator,” Energy Conversion and Management, vol. 52, no. 4, pp. 1959-1967, April 2011.

D. Ye, F. Xie, and Z. Hao, “A Novel Identification Scheme of Lightning Disturbance in HVDC Transmission Lines Based on CEEMD-HHT,” CPSS Transactions on Power Electronics and Applications, vol. 6, no. 2, pp. 145-154, June 2021.

G. R. Agah, A. Rahideh, H. Khodadadzadeh, S. M. Khoshnazar, and S. Hedayatikia, “Broken Rotor Bar and Rotor Eccentricity Fault Detection in Induction Motors Using a Combination of Discrete Wavelet Transform and Teager–Kaiser Energy Operator,” IEEE Transactions on Energy Conversion, vol. 37, no. 3, pp. 2199-2206, September 2022.

K. Yu, L. Bi, X. Zeng, H. Wu, and Y. Ni, “Induction Fault Traveling Wave Measurement Technique Based on Tunnel Magnetoresistance,” IEEE Transactions on Power Delivery, vol. 38, no. 6, pp. 4347-4357, December 2023.

F. Deng, P. Li, X. Zeng, L. Yu, and Y. Mao, “Fault Line Selection and Location Method Based on Synchrophasor Measurement Unit for Distribution Network,” Automation of Electric Power Systems, vol. 44, no. 19, pp. 160-167, 2020.

L. Xu, H. Su, D. Cai, and R. Zhou, “RDTS Noise Reduction Method Based on ICEEMDAN-FE-WSTD,” IEEE Sensors Journal, vol. 22, no. 18, pp. 17854-17863, September 2022.