Manufacturing, Testing of Polymer Nanocomposite and Analysis of Tennis Racket Frame

Authors

  • P. K. Chidambaram
  • R. Ramakrishanan

Keywords:

MWNT, nylon 6, 6, tennis racket frame, PRO/ENGINEER, ANSYS

Abstract

The modern days, the game of tennis expects high levels of performance from every international tennis players. The performance of every tennis player based on the tennis racket and playing conditions. The evolution of the tennis racket, with respect to both design and materials (tennis racket strings and grips) developed lots of new tennis racket frames. The tennis racket required to change in recent years as a result of lightweight, stiffer rackets for better performance. The paper discusses the manufacturing, testing, structural and modal analysis of four ratios of Nylon6,6/MWNT new polymer nanocomposite material replacing excising composite materials to a tennis racket frame for better mechanical properties to enhanced performance of the tennis racket. Using universal testing machine test and calculate the various mechanical properties strength, modulus, impact, hardness, stiffness, toughness of the polymer nanocomposite. In the design, the tennis racket frame was designed of the shape, dimensions. After design part created the 3D model using by PRO/ENGINEER software. The 3D racket model can be export to ANSYS analysis software and incorporated with new polymer nanocomposite properties. The structural and model analysis was done.

References

http://www.tenniscompany.com/about7.html, Choose the Right Tennis Racket, accessed on 14.04.2010

T. T. Mirela, D. Costina, and R. Lucian, “The design aspects of tennis rackets,” Fascicle of Management and Technological Engineering, vol. 9, no. 19, pp. 2.89-2.94, 2010.

M. Bartlett, “Tennis racket – materials, design, evolution and testing,” Materials World Journal, Materials World, vol. 8, no. 6, pp. 15-16, June 2000.

R. Khare and S. Bose, “Carbon nanotube based composite-a review,” Journal of Minerals and Materials Characterization and Engineering, vol. 4, no.1, pp. 31-46, 2005.

M. S. Dresselhaus, G. Dresselhaus, and P. Avouris,Carbon nanotubes: Synthesis, structure, properties, and applications. Springer-Verlag Berlin, Heidelberg, 2001.

S. L. Kodjie, L. Y. Li, B. Li, W. W. Cai, C. Y. Li, and M. Keating, “Morphology and crystallization behavior of HDPE/CNT nanocomposite,” Journal of Macromolecular Science, vol. 45, pp. 231- 245, 2006.

S. Iijima, Helical microtubules of graphitic carbon, Nature, 354, pp.56-58, 2011.

B.T. Kelly, Physics of graphite. Applied Science Publishers, London, 1981.

P. M. Ajayan, “Nanotubes from carbon,” Chemical Reviews, vol. 99, no. 7, pp. 1787-1800, 1999.

M. Endo, M. S. Strano, and P. M. Ajayan, Potential applications of carbon nanotubes. Springer-Verlag Berlin Heidelberg, vol. 111, pp. 13-62, 2008.

T. C. Lim, “Size-dependency consideration of montmorillonite-reinforced nylon-6 via interfacial stiffness,” Journal of Thermoplastic Composite Materials, vol. 24, no. 5, pp. 601-611, 2011.

S. Ward and J. Crosby, “The influence of microstructure on the mechanical property performance of long fiber reinforced thermoplastic composites,” Journal of Thermoplastic Composite Materials, vol. 3, no. 2, pp. 160-169, 1990.

H. Brody, “Physics of a tennis racket,” American Journal of Physics, vol. 47, pp. 482-487, 1979.

M. Brannign and S. Adali, “Mathematical modeling and simulation of a tennis racket,” Medicine and Science in Sports and Exersise, vol. 13, no. 1, pp. 44-53, 1981.

J. P. Lu, “Elastic properties of carbon nanotubes and nanoropes,” Physics Review Letter, vol. 79, no. 7, pp. 1297- 1300, 1997.

M. Meyyappan, Carbon Nanotubes: Science and Application. CRC press, July 15, 2004.

B. G. Demczyk, Y. M. Wang, J. Cumings, M. Hetman, W. Han, A. Zettl, and R. O. Ritchie, “Direct mechanical measurement of the tensile strength and elastic modulus of multiwalled carbon nanotubes,” Journal of Materials Science & Engineering A, Elsevier pub. A334, pp. 173- 178, 2002.

K. T. Lau, M. Chipara, H. Y. Ling, and D. Hui, “On the effective elastic moduli of carbon nanotubes for nanocomposite structures,” Composite Part B Eng., vol. 35, no. 2, pp. 95- 101, 2004.

M. F. Yu, O. Lourie, M. J. Dyer, K. Moloni, T. F. Kelly, and R. S. Ruoff, “Strength and breaking mechanics of multiwalled carbon nanotubes under tensile load Science,” Science, vol. 287, no. 5453, pp. 637-640, 2000.

M. K. Sanja, Composites manufacturing: materials, product and process engineering. CRC Press, 2002.

P. C. Lin, “The vibration characteristic analysis of tennis racket,” Journal Physical education and Sport Science, pp. 67-85, June 1998.

Y. D. Gu and J. S. Li, “Dynamic simulation of tennis racket and string,” International Journal of Sports Science and Engineering, vol. 1, no. 1, pp. 55-60, 2007.

L. L Li, S. H. Yang, C. S. Hwang, and Y. S. Kim, “Effects of string tension and impact location on tennis playing,” Journal of Mechanical Science and Technology, Springer pub., vol. 23, no. 11, pp. 2990-2997, 2009.

Downloads

Published

2014-01-01

How to Cite

[1]
P. K. Chidambaram and R. Ramakrishanan, “Manufacturing, Testing of Polymer Nanocomposite and Analysis of Tennis Racket Frame”, Int. j. eng. technol. innov., vol. 4, no. 1, pp. 59–67, Jan. 2014.

Issue

Section

Articles