A 2D Time Domain DRBEM Computer Model for MagnetoThermoelastic Coupled Wave Propagation Problems
Keywords:
magneto-thermo-elasticity, relaxation times, anisotropic, functionally graded solid, dual reciprocity boundary element methodAbstract
A numerical computer model based on the dual reciprocity boundary element method (DRBEM) is extended to study magneto-thermoelastic coupled wave propagation problems with relaxation times involving anisotropic functionally graded solids. The model formulation is tested through its application to the problem of a solid placed in a constant primary magnetic field acting in the direction of the z-axis and rotating about this axis with a constant angular velocity. In the case of two-dimensional deformation, an implicit-explicit time domain DRBEM was presented and implemented to obtain the solution for the displacement and temperature fields. A comparison of the results is presented graphically in the context of Lord and Shulman (LS) and Green and Lindsay (GL) theories. Numerical results that demonstrate the validity of the proposed method are also presented graphically.References
H. W. Lord and Y. Shulman, “A generalized dynamical theory of thermoelasticity,” Journal of the Mechanics and Physics of Solids, vol. 15, pp. 299-309, 1967.
A. E. Green and K. A. Lindsay, “Thermoelasticity,” Journal of Elasticity, vol. 2, no. 1, pp. 1-7, 1972.
A. E. Green and P. M. Naghdi, “On undamped heat waves in an elastic solid,” Journal of Thermal Stresses, vol. 15, no. 2, pp. 253-264, 1992.
A. E. Green and P. M. Naghdi, “Thermoelasticity without energy dissipation,” Journal of Elasticity, vol. 31, pp. 189-208, 1993.
P. Das and M. Kanoria,“Magneto-thermo-elastic response in a perfectly conducting medium with three-phase-lag effect,” Acta Mechanica, vol. 223, pp. 811-828, 2012.
W. Huacasi, W. J. Mansur, and J. P. S. Azevedo, “A novel hypersingular B.E.M. formulation for three-dimensional potential problems,” Journal of Brazilian Society of Mechanical Sciences and Engineering, vol. 25, pp. 364-372, 2003.
G. H. Paulino and J. H. Kim, “The weak patch test for nonhomogeneous materials modeled with graded finite elements,” Journal of Brazilian Society of Mechanical Sciences and Engineering, vol. 29, pp. 63-81, 2007.
A. M. Abd-Alla, A. M. El-Naggar and M. A. Fahmy, “Magneto-thermoelastic problem in non-homogeneous isotropic cylinder,” Heat and Mass transfer, vol. 39, pp. 625-629, 2003.
A. M. Abd-Alla, M. A. Fahmy and T. M. El-Shahat, “Magneto-thermo-elastic stresses in inhomogeneous anisotropic solid in the presence of body force,” Far East Journal of Applied Mathematics, vol. 27, pp. 499-516, 2007.
A. M. Abd-Alla, M. A. Fahmy and T. M. El-Shahat, “Magneto-thermo-elastic problem of a rotating non-homogeneous anisotropic solid cylinder,”Archive of Applied Mechanics, vol. 78, pp. 135-148, 2008.
M. A. Fahmy, “Effect of initial stress and inhomogeneity on magneto-thermo-elastic stresses in a rotating anisotropic solid," JP Journal of Heat and Mass Transfer, vol. 1, pp. 93-112, 2007.
M. A. Fahmy, “Thermoelastic stresses in a rotating non-homogeneous anisotropic body,” Numerical Heat Transfer, Part A: Applications, vol. 53, pp. 1001-1011, 2008.
M. A. Fahmy, “Thermal stresses in a spherical shell under three thermoelastic models using FDM,” International Journal of Numerical Methods and Applications, vol. 2, pp. 123-128, 2009.
M. A. Fahmy, “Finite difference algorithm for transient magneto-thermo-elastic stresses in a non-homogeneous solid cylinder,” International Journal of Materials Engineering and Technology, vol. 3, pp. 87-93, 2010.
M. A. Fahmy, “A time-stepping DRBEM for magneto-thermo-viscoelastic interactions in a rotating nonhomogeneous anisotropic solid,” International Journal of Applied Mechanics, vol. 3, pp. 1-24, 2011.
M. A. Fahmy, “Numerical modeling of transient magneto-thermo-viscoelastic waves in a rotating nonhomogeneous anisotropic solid under initial stress,” International Journal of Modeling, Simulation and Scientific Computing, vol. 3, pp. 125002, 2012.
M. A. Fahmy and T. M. El-Shahat, “The effect of initial stress and inhomogeneity on the thermoelastic stresses in a rotating anisotropic solid,” Archive of Applied Mechanics, vol. 78, pp. 431-442, 2008.
Y. Han and W. Hong, “Coupled magnetic field and viscoelasticity of ferrogel,” International Journal of Applied Mechanics, vol. 3, pp. 259-278, 2011.
Q. L. Xiong and X. G. Tian,“Transient magneto-thermoelastic response for a semi-infinite body with voids and variable material properties during thermal shock,” International Journal of Applied Mechanics, vol. 3, pp. 881-902, 2011.
L. Marin, L. Elliott, P. J. Heggs, D. B. Ingham, D. Lesnic and X. Wen, “Dual reciprocity boundary element method solution of the Cauchy problem for Helmholtz-type equations with variable coefficients,” Journal of Sound and Vibration, vol. 297, pp. 89-105, 2006.
J. Wen and M. M. Khonsari, “Transient heat conduction in rolling/sliding components by a dual reciprocity boundary element method,” International Journal of Heat and Mass Transfer, vol. 52, pp. 1600-1607, 2009.
S. H. Javaran, N. Khaji and A. Noorzad, “First kind Bessel function (J-Bessel) as radial basis function for plane dynamic analysis using dual reciprocity boundary element method,” Acta Mechanica, vol. 218, pp. 247-258, 2011.
D. Nardini and C. A. Brebbia, “A new approach to free vibration analysis using boundary elements,” Applied Mathematical Modelling, vol. 7, pp. 157-162, 1983.
C. A. Brebbia, J. C. F. Telles, and L. Wrobel, Boundary element techniques in engineering. New York: Springer-Verlag, 1984.
L. C. Wrobel and C. A. Brebbia, “The dual reciprocity boundary element formulation for nonlinear diffusion problems,” Computer Methods in Applied Mechanics and Engineering, vol. 65, pp. 147-164, 1987.
P. W. Partridge and C. A. Brebbia, “Computer implementation of the BEM dual reciprocity method for the solution of general field equations,” Communications Applied Numerical Methods, vol. 6, pp. 83-92, 1990.
P. W. Partridge, C. A. Brebbia and L. C. Wrobel, The dual reciprocity boundary element method. Southampton: Computational Mechanics Publications, 1992.
P. W. Partridge and L. C. Wrobel, “The dual reciprocity boundary element method for spontaneous ignition,” International Journal for Numerical Methods in Engineering, vol. 30, pp. 953-963, 1990.
A. M. El-Naggar, A. M. Abd-Alla, M. A. Fahmy, and S. M. Ahmed, “Thermal stresses in a rotating non-homogeneous orthotropic hollow cylinder,” Heat and Mass Transfer, vol. 39, pp. 41-46, 2002.
A. M. El-Naggar, A. M. Abd-Alla, and M. A. Fahmy, “The propagation of thermal stresses in an infinite elastic slab," Applied Mathematics and Computation, vol. 157, pp. 307-312, 2004.
L. Gaul, M. Kögl, M. Wagner, Boundary element methods for engineers and scientists. Berlin: Springer-Verlag, 2003.
M. A. Fahmy, “Application of DRBEM to non-steady state heat conduction in non-homogeneous anisotropic media under various boundary elements,” Far East Journal of Mathematical Sciences, vol. 43, pp. 83-93, 2010.
M. A. Fahmy, “Influence of inhomogeneity and initial stress on the transient magneto-thermo-visco-elastic stress waves in an anisotropic solid,” World Journal of Mechanics, vol. 1, pp. 256-265, 2011.
M. A. Fahmy, “Transient magneto-thermoviscoelastic plane waves in a non-homogeneous anisotropic thick strip subjected to a moving heat source,” Applied Mathematical Modelling, vol. 36, pp. 4565-4578, 2012.
M. A. Fahmy, “Transient magneto-thermo-elastic stresses in an anisotropic viscoelastic solid with and without moving heat source,” Numerical Heat Transfer, Part A: Applications, vol. 61, pp. 547-564, 2012.
Published
How to Cite
Issue
Section
License
Copyright Notice
Submission of a manuscript implies: that the work described has not been published before that it is not under consideration for publication elsewhere; that if and when the manuscript is accepted for publication. Authors can retain copyright in their articles with no restrictions. Also, author can post the final, peer-reviewed manuscript version (postprint) to any repository or website.
Since Jan. 01, 2019, IJETI will publish new articles with Creative Commons Attribution Non-Commercial License, under Creative Commons Attribution Non-Commercial 4.0 International (CC BY-NC 4.0) License.
The Creative Commons Attribution Non-Commercial (CC-BY-NC) License permits use, distribution and reproduction in any medium, provided the original work is properly cited and is not used for commercial purposes.
.jpg)
