Laboratory Model Tests on Stone Column and Pervious Concrete Columns: A Comparative Study
DOI:
https://doi.org/10.46604/ijeti.2021.7993Keywords:
ground improvement, stone column, pervious concrete column, composite column, model testAbstract
This study aims to perform laboratory model tests to investigate the load-deformation behavior of stone columns (SCs), pervious concrete columns (PCCs), and composite columns (CCs). Here, CC refers to the column which has the upper portion made of PCC and the lower portion made of SC. The parameters investigated in this study include column diameters, column lengths, and installation methods (pre-cast and cast-in-situ methods). The results of the model tests reveal that the axial load-carrying capacity of PCC is nearly 8 times more than that of SC with the same diameter. Moreover, it is also observed that at the top portion of SC, with the PCC length which is about 3.75 to 5 times the column diameter, the load-carrying capacity can significantly increase. It is concluded that the installation methods have marginal influence on the load-deformation behavior of PCC.
References
J. T. Shahu, M. R. Madhav, and S. Hayashi, “Analysis of Soft Ground-Granular Pile-Granular Mat System,” Computers and Geotechnics, vol. 27, no. 1, pp. 45-62, July 2000.
D. Alexiew, C. Moormann, and H. Jud, “Foundation of a Coal/Coke Stockyard on Soft Soil with Geotextile Encased Columns and Horizontal Reinforcement,” 17th International Conference on Soil Mechanics and Geotechnical Engineering, pp. 2236-2239, October 2009.
M. T. Suleiman, L. Ni, and A. Raich, “Development of Pervious Concrete Pile Ground-Improvement Alternative and Behavior Under Vertical Loading,” Journal of Geotechnical and Geoenvironmental Engineering, vol. 140, no. 7, 04014035, July 2014.
H. T. Kim, C. H. Yoo, J. S. Hwang, and Y. J. Sim, “Application of Porous Concrete to a Structural Foundation in Soft Ground,” Advanced Materials Research, vols. 26-28, pp. 895-898, October 2007.
H. Lin, M. T. Suleiman, H. M. Jabbour, D. G. Brown, and E. Kavazanjian, “Enhancing the Axial Compression Response of Pervious Concrete Ground Improvement Piles Using Biogrouting,” Journal of Geotechnical and Geoenvironmental Engineering, vol. 142, no. 10, 04016045, October 2016.
T. Xu, P. Huang, L. Lei, C. Luo, and Z. Feng, “Additive Material Effects on Geotechnical Performance of Pervious Concrete,” Electronic Journal of Geotechnical Engineering, vol. 19, pp. 6625-6633, 2014.
L. Ni, M. T. Suleiman, and A. Raich, “Behavior Soil-Structure Interaction of Pervious Concrete Ground-Improvement Piles Under Lateral Loading,” Journal of Geotechnical and Geoenvironmental Engineering, vol. 142, no. 2, 04015071, February 2016.
B. Rehder, K. Banh, and N. Neithalath, “Fracture Behavior of Pervious Concretes: The Effects of Pore Structure and Fibers,” Engineering Fracture Mechanics, vol. 118, pp. 1-16, March 2014.
M. S. Sumanasooriya and N. Neithalath, “Stereology- and Morphology-Based Pore Structure Descriptors of Enhanced Porosity (Pervious) Concretes,” ACI Materials Journal, vol. 106, no. 5, pp. 429-438, September 2009.
S. Kim, D. Lee, J. Lee, S. K. You, and H. Choi, “Application of Recycled Aggregate Porous Concrete Pile (RAPP) to Improve Soft Ground,” Journal of Material Cycles and Waste Management, vol. 14, no. 4, pp. 360-370, August 2012.
M. Ziccarelli and C. Valore, “Hydraulic Conductivity and Strength of Pervious Concrete for Deep Trench Drains,” Geomechanics for Energy and the Environment, vol. 18, pp. 41-55, June 2019.
Y. Xiao, A. W. Stuedlein, Z. Pan, H. Liu, T. M. Evans, X. He, et al., “Toe-Bearing Capacity of Precast Concrete Piles through Biogrouting Improvement,” Journal of Geotechnical and Geoenvironmental Engineering, vol. 146, no. 12, 06020026, December 2020.
M. S. Lund, J. T. Kevern, V. R. Schaefer, and K. K. Hansen, “Mix Design for Improved Strength and Freeze-Thaw Durability of Pervious Concrete Fill in Pearl-Chain Bridges,” Materials and Structures, vol. 50, no. 1, 42, February 2017.
Q. Jin, X. Cui, S. Cui, J. Zhang, F. Lian, X. Wang, et al., “In Situ Evaluation and Analysis of Improvement Effects of Pervious Concrete Pile on Alluvial Silt Ground,” Geomechanics and Geoengineering, vol. 16, no. 3, pp. 211-222, 2021.
L. G. Li, J. J. Feng, J. Zhu, S. H. Chu, and A. K. H. Kwan, “Pervious Concrete: Effects of Porosity on Permeability and Strength,” Magazine of Concrete Research, vol. 73, no. 2, pp. 69-79, January 2021.
Y. K. Tandel, C. H. Solanki, and A. K. Desai, “Application of Pervious Concrete for Strengthening of Stone Column for Ground Improvement,” 8th Biennial Conference on Structural Engineering Convention, pp. 177-181, December 2012.
J. Patel, Y. Tandel, J. Joseph, and C. Solanki, “Numerical Study of Behavior of a Group Pile Made of Pervious Concrete and Stone Aggregate,” 8th International Conference on Electrical, Electronics, and Civil Engineering, pp. 45-48, January 2016.
J. Zhang, X. Cui, D. Huang, Q. Jin, J. Lou, and W. Tang, “Numerical Simulation of Consolidation Settlement of Pervious Concrete Pile Composite Foundation under Road Embankment,” International Journal of Geomechanics, vol. 16, no. 1, B4015006, September 2015.
J. Zhang, X. Cui, R. Lan, Y. Zhao, H. Lv, Q. Xue, et al., “Dynamic Performance Characteristics of Pervious Concrete Pile Composite Foundations under Earthquake Loads,” Journal of Performance of Constructed Facilities, vol. 31, no. 5, 04017064, October 2017.
R. S. V. Rashma, R. Shivashankar, and B. R. Jayalekshmi, “Shear Response of Pervious Concrete Column Improved Ground,” Indian Geotechnical Journal, in press.
D. M. Wood, W. Hu, and D. F. Nash, “Group Effects in Stone Column Foundations: Model Tests,” Geotechnique, vol. 56, no. 6, pp. 689-698, December 2000.
J. T. Shahu and Y. R. Reddy, “Clayey Soil Reinforced with Stone Column Group: Model Tests and Analyses,” Journal of Geotechnical and Geoenvironmental Engineering, vol. 137, no. 12, pp. 1265-1274, December 2011.
Methods of Test for Soils: Part 5 Determination of Liquid and Plastic Limit, IS: 2720 (Part 5), 1985.
Methods of Test for Soils: Part 3 Determination of Specific Gravity, Section 1 Fine Grained Soils, IS: 2720 (Part 3/Section 1), 1980.
Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System), ASTM D2487-17e1, 2017.
Methods of Test for Soils: Part 29 Determination of Dry Density of Soils In-Place by the Core-Cutter Method, IS: 2720 (Part 29), 1975.
Methods of Test for Soils: Part 30 Laboratory Vane Shear Test,” IS: 2720 (Part 30), 1980.
Methods of Test for Soils: Part 2 Determination of Water Content,” IS: 2720 (Part 2), 1973.
Methods of Test for Soils: Part 3 Determination of Specific Gravity, Section 2 Fine, Medium and Coarse Grained Soils, IS: 2720 (Part 3/Section 2), 1980.
Methods of Test for Soils: Part 14 Determination of Density Index (Relative Density) of Cohesionless Soils, IS: 2720 (Part 14), 1983.
Methods of Test for Soils: Part 13 Direct Shear Test, IS: 2720 (Part 13), 1986.
Methods of Test for Soils: Part 4 Grain Size Analysis, IS: 2720 (Part 4), 1985.
Methods of Physical Tests for Hydraulic Cement: Part 4 Determination of Consistency of Standard Cement Paste, IS: 4031 (Part 4), 1988.
Methods of Physical Tests for Hydraulic Cement: Part 5 Determination of Initial and Final Setting Times, IS: 4031 (Part 5), 1988.
Methods of Physical Tests for Hydraulic Cement: Part 6 Determination of Compressive Strength of Hydraulic Cement Other Than Masonry Cement, IS: 4031 (Part 6), 1988.
Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens, ASTM C39, 2021.
ACI Committee 522, Pervious Concrete, Farmington Hills: American Concrete Institute, 2010.
Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory, ASTM C192, 2019.
M. Sonebi, M. Bassuoni, and A. Yahia, “Pervious Concrete: Mix Design, Properties and Applications,” RILEM Technical Letters, vol. 1, pp. 109-115, March 2016.
S. H. Chu, “Effect of Paste Volume on Fresh and Hardened Properties of Concrete,” Construction and Building Materials, vol. 218, pp. 284-294, September 2019.
S. H. Chu, “Development of Infilled Cementitious Composites (ICC),” Composite Structures, vol. 267, 113885, July 2021.
A. P. Ambily and S. R. Gandhi, “Behavior of Stone Columns Based on Experimental and FEM Analysis,” Journal of Geotechnical and Geoenvironmental Engineering, vol. 133, no. 4, pp. 405-415, April 2007.
M. Vekli, M. Aytekin, S. B. İkizler, and Ü. Çalik, “Experimental and Numerical Investigation of Slope Stabilization by Stone Columns,” Natural Hazards, vol. 64, no. 1, pp. 797-820, October 2012.
K. Ali, J. T. Shahu, and K. G. Sharma, “Model Tests on Geosynthetic-Reinforced Stone Columns: A Comparative Study,” Geosynthetics International, vol. 19, no. 4, pp. 292-305, August 2012.
T. Munaga, M. M. Khan, and K. K. Gonavaram, “Axial and Lateral Loading Behaviour of Pervious Concrete Pile,” Indian Geotechnical Journal, vol. 50, no. 3, pp. 505-513, June 2020.
L. Ni, “Pervious Concrete Piles: Development and Investigation of an Innovative Ground Improvement System,” Ph.D. dissertation, Department of Civil Engineering, Lehigh University, Bethlehem, PA, 2014.
J. M. O. Hughes, N. J. Withers, and D. A. Greenwood, “A Field Trial of the Reinforcing Effect of a Stone Column in Soil,” Geotechnique, vol. 25, no. 1, pp. 31-44, 1975.
Design and Construction for Ground Improvement—Guidelines: Part 1 Stone Columns, IS: 15284 (Part 1), 2003.
J. M. O. Hughes and N. J. Withers, “Reinforcing of Soft Cohesive Soils with Stone Columns,” Ground Engineering, vol. 7, no. 3, pp. 42-49, 1974.
M. R. Madhav and N. Miura, “Soil Improvement Panel Report on Stone Columns,” 13th International Conference on Soil Mechanics and Foundation Engineering, pp. 163-164, January 1994.
Published
How to Cite
Issue
Section
License
Copyright Notice
Submission of a manuscript implies: that the work described has not been published before that it is not under consideration for publication elsewhere; that if and when the manuscript is accepted for publication. Authors can retain copyright in their articles with no restrictions. Also, author can post the final, peer-reviewed manuscript version (postprint) to any repository or website.
Since Jan. 01, 2019, IJETI will publish new articles with Creative Commons Attribution Non-Commercial License, under Creative Commons Attribution Non-Commercial 4.0 International (CC BY-NC 4.0) License.
The Creative Commons Attribution Non-Commercial (CC-BY-NC) License permits use, distribution and reproduction in any medium, provided the original work is properly cited and is not used for commercial purposes.