Self-Sensing Potential of Metashale Geopolymer Mortars with Carbon Fiber/Graphite Powder Admixtures

Authors

  • Petr Hotěk Department of Materials Engineering and Chemistry, Faculty of Civil Engineering, Czech Technical University in Prague, Prague, Czech Republic
  • Jiří Litoš Experimental Centre, Faculty of Civil Engineering, Czech Technical University in Prague, Prague, Czech Republic https://orcid.org/0000-0002-5807-1237
  • Wei-Ting Lin Department of Civil Engineering, National Ilan University, Yilan, Taiwan, ROC https://orcid.org/0000-0003-4792-4457
  • Lukáš Fiala Department of Materials Engineering and Chemistry, Faculty of Civil Engineering, Czech Technical University in Prague, Prague, Czech Republic https://orcid.org/0000-0002-9497-7028

DOI:

https://doi.org/10.46604/ijeti.2024.13570

Keywords:

geopolymers, self-sensing, carbon fibers, graphite powder, DC

Abstract

Multifunctional building materials with self-sensing capability have great potential for civil engineering applications. The self-sensing capability of typically calcium aluminosilicate matrices of cementitious or geopolymer materials is adopted by admixing electrically conductive admixtures in an amount that ensures optimal electrical properties and their proportionality to mechanical loading. The paper aims to evaluate the self-sensing capability of 4 metashale geopolymer mortars with graphite powder (GP) and carbon fibers (CF) in different ratios, including MGF 5/0, MGF 4.5/0.5, MGF 4/1, and MGF 3/0. The 4-probe measurements at 21 V DC input voltage on (100 × 100 × 100) mm3 samples with embedded copper-grid electrodes evaluate the gauge factor, which corresponds to the monitored changes in electrical resistivity. Despite the limitations of DC measurements, the self-sensing capability is observed for all the mixtures. The most promising response to dynamic loading with an FCR of 0.018%, is observed for the MGF 4.5/0.5 sample.

References

F. Farooq, X. Jin, M. F. Javed, A. Akbar, M. I. Shah, F. Aslam, et al., “Geopolymer Concrete as Sustainable Material: A State of the Art Review,” Construction and Building Materials, vol. 306, article no. 124762, November 2021.

H. van Oss and A. C. Padovani, “Cement Manufacture and the Environment Part II: Environmental Challenges and Opportunities,” Journal of Industrial Ecology, vol. 7, no. 1, pp. 93-126, January 2003.

A. Ślosarczyk, J. Fořt, I. Klapiszewska, M. Thomas, Ł. Klapiszewski, and R. Černý, “A Literature Review of the Latest Trends and Perspectives regarding Alkali-Activated Materials in Terms of Sustainable Development,” Journal of Materials Research and Technology, vol. 25, pp. 5394-5425, July–August 2023.

Y. Li, J. Shen, H. Lin, and Y. Li, “Optimization Design for Alkali-Activated Slag-Fly Ash Geopolymer Concrete Based on Artificial Intelligence considering Compressive Strength, Cost, and Carbon Emission,” Journal of Building Engineering, vol. 75, article no. 106929, September 2023.

J. Li, B. W. Y. Tay, J. Lei, and E. H. Yang, “Experimental Investigation of Seebeck Effect in Metakaolin-Based Geopolymer,” Construction and Building Materials, vol. 272, article no. 121615, February 2021.

J. Fořt and R. Černý, “Transition to Circular Economy in the Construction Industry: Environmental Aspects of Waste Brick Recycling Scenarios,” Waste Management, vol. 118, pp. 510-520, December 2020.

B. Han, S. Sun, S. Ding, L. Zhang, X. Yu, and J. Ou, “Review of Nanocarbon-Engineered Multifunctional Cementitious Composites,” Composites Part A: Applied Science and Manufacturing, vol. 70, pp. 69-81, March 2015.

L. Fiala, V. Pommer, M. Böhm, L. Scheinherrová, and R. Černý, “Self-Heating Alkali Activated Materials: Microstructure and Its Effect on Electrical, Thermal and Mechanical Properties,” Construction and Building Materials, vol. 335, article no. 127527, June 2022.

S. Gwon, H. Kim, and M. Shin, “Self-Heating Characteristics of Electrically Conductive Cement Composites with Carbon Black and Carbon Fiber,” Cement and Concrete Composites, vol. 137, article no. 104942, March 2023.

S. Rana, P. Subramani, R. Fangueiro, and A. G. Correia, “A Review on Smart Self-Sensing Composite Materials for Civil Engineering Applications,” AIMS Materials Science, vol. 3, no. 2, pp. 357-379, 2016.

W. Dong, W. Li, Y. Guo, Z. Sun, F. Qu, R. Liang, et al., “Application of Intrinsic Self-Sensing Cement-Based Sensor for Traffic Detection of Human Motion and Vehicle Speed,” Construction and Building Materials, vol. 355, article no. 129130, November 2022.

Y. Guo, W. Li, W. Dong, Z. Luo, F. Qu, F. Yang, et al., “Self-Sensing Performance of Cement-Based Sensor with Carbon Black and Polypropylene Fibre Subjected to Different Loading Conditions,” Journal of Building Engineering, vol. 59, article no.105003, November 2022.

S. Ding, S. Dong, A. Ashour, and B. Han, “Development of Sensing Concrete: Principles, Properties and Its Applications,” Journal of Applied Physics, vol. 126, no. 24, article no. 241101, December 2019.

Z. Tian, Y. Li, J. Zheng, and S. Wang, “A State-of-the-Art on Self-Sensing Concrete: Materials, Fabrication and Properties,” Composites Part B: Engineering, vol. 177, article no. 107437, November 2019.

V. Růžek, A. M. Dostayeva, J. Walter, T. Grab, and K. Korniejenko, “Carbon Fiber-Reinforced Geopolymer Composites: A Review,” Fibers, vol. 11, no. 2, article no. 17, February 2023.

Methods of Testing Cement - Part 1: Determination of Strength, ČSN EN 196-1 (722100) Standard, 2016.

L. Fiala, M. Jerman, P. Rovnanik, and R. Černý, “Basic Physical, Mechanical and Electrical Properties of Electrically Enhanced Alkali-Activated Aluminosilicates,” Materiali in Tehnologije/Materials and Technology, vol. 51, no. 6, pp. 1005-1009, 2017.

J. Zhang, A. Heath, R. J. Ball, and K. Paine, “Effect of Fibre Loading on the Microstructural, Electrical, and Mechanical Properties of Carbon Fibre Incorporated Smart Cement-Based Composites,” Frontiers in Materials, vol. 9, article no. 1055796, November 2022.

A. Cheng, W. T. Lin, L. Fiala, P. Hotěk, S. J. Chao, and H. M. Hsu, “Electrical Resistance and Self-Sensing Properties of Pressure-Sensitive Materials with Graphite Filler in Kuralon Fiber Concrete,” Materials Science-Poland, vol. 40, no. 2, pp. 223-239, August 2022.

P. Garcés, E. Zornoza, E. G. Alcocel, Ó. Galao, and L. G. Andión, “Mechanical Properties and Corrosion of CAC Mortars with Carbon Fibers,” Construction and Building Materials, vol. 34, pp. 91-96, September 2012.

D. Zhang, Y. Wang, T. Zhang, and Q. Yang, “Engineering and Microstructural Properties of Carbon-Fiber-Reinforced Fly-Ash-Based Geopolymer Composites,” Journal of Building Engineering, vol. 79, article no. 107883, November 2023.

T. Luo, H. Yuan, and Q. Wang, “Comparison the Properties of Carbon Fiber-Based Portland Cement and Alkali-Activated Fly Ash/Slag Conductive Cementitious Composites,” Journal of Building Engineering, vol. 76, article no. 107134, October 2023.

J. Gomis, O. Galao, V. Gomis, E. Zornoza, and P. Garcés, “Self-Heating and Deicing Conductive Cement. Experimental Study and Modeling,” Construction and Building Materials, vol. 75, pp. 442-449, January 2015.

A. O. Monteiro, P. M. F. J. Costa, M. Oeser, and P. B. Cachim, “Dynamic Sensing Properties of a Multifunctional Cement Composite with Carbon Black for Traffic Monitoring,” Smart Materials and Structures, vol. 29, no. 2, article no. 025023, February 2020.

P. Rovnaník, I. Kusák, P. Bayer, P. Schmid, and L. Fiala, “Comparison of Electrical and Self-Sensing Properties of Portland Cement and Alkali-Activated Slag Mortars,” Cement and Concrete Research, vol. 118, pp. 84-91, April 2019.

P. Rovnaník, I. Kusák, P. Bayer, P. Schmid, and L. Fiala, “Electrical and Self-Sensing Properties of Alkali-Activated Slag Composite with Graphite Filler,” Materials, vol. 12, no. 10, article no.1616, May 2019.

F. Azhari and N. Banthia, “Cement-Based Sensors with Carbon Fibers and Carbon Nanotubes for Piezoresistive Sensing,” Cement and Concrete Composites, vol. 34, no. 7, pp. 866-873, August 2012.

Y. Ma, F. Li, H. Xie, W. Liu, X. Ouyang, J. Fu, et al., ”Self-Sensing Properties of Alkali-Activated Materials Prepared with Different Precursors,” Construction and Building Materials, vol. 409, article no. 134201, December 2023.

D. D. L. Chung, “A Critical Review of Electrical-Resistance-Based Self-Sensing in Conductive Cement-Based Materials,” Carbon, vol. 203, pp. 311-325, January 2023.

Downloads

Published

2024-09-05

How to Cite

[1]
Petr Hotěk, Jiří Litoš, Wei-Ting Lin, and Lukáš Fiala, “Self-Sensing Potential of Metashale Geopolymer Mortars with Carbon Fiber/Graphite Powder Admixtures”, Int. j. eng. technol. innov., vol. 14, no. 4, pp. 423–433, Sep. 2024.

Issue

Section

Articles